What Is The Home Floor Heating System

1. Heat source
Generally, the floor radiant heating system is completed by the main heat source of the gas fireplace. In some low-density or large residential areas, there are some boiler application systems. Ordinary ovens and cold ovens are gas fireplaces. However, according to the price issue, it is still based on ordinary gas wallboard.
2. Temperature control center
The floor heating system uses a separate shared heat source. In use, low heating cost and minimum smoke and condensation prevention temperature must be ensured. The combustion efficiency of the boiler is maximized. The outlet temperature of the boiler shall be kept between 70 and 80 ℃, but the service life of the floor heating pipe must also be considered. It is better to control the water temperature of the floor between 40 and 50 degrees Celsius.
3.Dividing line
In the underfloor heating system, the most important functions of the collector are balance flow, temperature control, water distribution, exhaust and maintenance. The water separator is mainly responsible for providing heat source for each floor heating pipeline. The water collector is mainly responsible for concentrating the water in each pipe and returning it to the heat source for reheating. The secondary capture is mainly responsible for the heat balance distribution of the entire floor heating system, as well as the terminal execution and temperature control functions.
Domestic floor heating system
4. Radiant floor piping.
The most important part of the floor heating system is the floor heating pipeline. After the pipe is completely installed, it shall not be repaired or removed unless the service life of the building changes. Common pipes are PEX pipe and PERT pipe. The oldest pipe is PEXC pipe which is resistant to high temperature. The tube can withstand a temperature of 90 ℃. Therefore, it is widely used in the main pipe of floor heating system.
5. Channel control and temperature control.
In order to maintain good heat, it is necessary to reserve some basic materials for the required temperature and water flow, such as water temperature control, room temperature control, hydraulic balance gate, etc. By controlling the water flow in the system, each room is provided with heating to meet the perfect heating demand of the owner, so as to establish its own indoor temperature. Effectively use energy to achieve the goal of saving and not wasting.