1. The surface temperature should not be too high
When using floor heating equipment, special attention should be paid to the fact that the surface temperature should not be higher than 28°C, and the temperature of the water pipe should not be higher than 45°C. If this temperature is exceeded, it is likely to damage the service life of the floor.
2. Turn off the geothermal system, pay attention to gradual cooling
After the winter, the weather starts to warm up and the temperature starts to increase, so there is no need to turn on the geothermal heating system, but pay attention to turning off the floor heating and not to suddenly cool down, and there must be a gradual process, otherwise the floor will also affect the service life of the floor. of.
3. When the room is too dry, humidification needs to be considered
In winter, the climate is relatively dry, coupled with the use of floor heating, the floor is in a high temperature state for a long time, and it is prone to dry cracking. At this time, the room should be properly humidified to avoid dry cracking or deformation of the floor.
4. Timely deflate for floor heating
During the use of floor heating, the pipes are easy to accumulate air, which will affect the heating. First open the exhaust valves of the sub and water collectors to discharge the gas. The method is the same as that of traditional heating, and it is necessary to ensure the smooth flow of the floor heating pipes.