1. Check for leaks
Although the developer or the heating service provider has already checked that the floor heating system is in good condition when inspecting the house, man-made damage that may occur during the decoration will still interfere with the normal operation of the floor heating system. Before running the water floor heating for the first time, the relevant pipelines should be tested for pressure to see if there is any leakage of water and electricity.
2. Do not heat up suddenly
Whether it is the first time to use, or the floor heating that has been used for a long time, when the floor heating system is just turned on, the system temperature cannot be set too high. When the temperature in the house is very low, the temperature of the floor heating system is suddenly raised, and the floor heating components cannot accept the high temperature for a while. There is no slow adaptation time, which will not only damage the original parts of the floor heating system, but also affect The use time of the floor heating system may deform the floor at the same time.
3. Energy saving and money saving
When there is no one in the house, control the temperature to 13 degrees Celsius to 15 degrees Celsius, and someone can control the temperature in the house to 18 degrees Celsius to 20 degrees Celsius. With this setting, the indoor temperature rises very quickly. Of course, when there is no one in the room for a long time, you might as well turn off the floor heating system, and wait for someone at home for a long time to start the floor heating system.