1. Anti-static function: A spring is set between the ball, the valve stem and the valve body, which can export the static electricity gented during the switching process. 2. Since
Mar 18, 2022
1. Adjust the room tempture The manifold is responsible for the diversion in the floor heating. The greater the water flow, the faster the circulation, and the higher the indoor te
The 90-degree elbow belongs to the most commonly used type of elbow fittings. As a pipe fitting that needs to be connected, in some fields of use, right-angle pipes need to be conn
1. Common reasons for water leakage at the live joint are: loose joint, water leakage on the body, and damage to the live joint pad. 2. If there is water leakage at the live joint,
Mar 17, 2022
Preparations for float valve installation 1. Ensure that the pipeline at the installation position of the floating ball valve is in the coaxial position, and the two flanges on the
Preparation before ball valve installation 1. The front and rear pipes should be coaxial, and the sealing surfaces of the two flanges should be parallel. The pipeline should be abl
Advantages of Plastic flex down pipe: 1. Good performance. Corrosion resistance, high impact strength, small fluid resistance, aging resistance, long service life, is an ideal mate
The manifold is the control center of the entire floor heating system. It is equivalent to the heart of floor heating and has the function of dividing the flow and pressure. When t
Treatment Method of PPR Female Elbow Crack and Leakage 1. Cut off the water and replace the elbow. Find PPR hot-melt welding wire and use a hot-melt gun to heat and weld. This cons
The difference between PPR and PVC pipes is as follows: 1. The essence is different: PPR pipe is also called three-type polypropylene pipe. It uses random co-polymerized polypropyl
1. The pipes should be clean Before welding the PPR pipe, first ensure that the pipe is clean and dry. There should be no oil stains, dust, impurities and other dirt on the surface
1. Compared with metal pipes, PPR pipes have lower hardness and poorer rigidity. They should be protected during handling and construction to avoid mechanical damage caused by impr
