Laying the hydropower system is a big problem that every family faces in the process of home improvement. The types of water pipe materials on the market continue to increase, and
Dec 15, 2022
1. The frequency of using the faucet in daily life will be relatively high, and some parts will rust after a long time, and then the faucet can no longer be used normally. Therefor
1. If the amount of water flowing out of the faucet is very small after the faucet is turned on, it may be that the inside of the faucet is blocked, especially for the internal bub
Between 100 and 250 mm. But this is only the design scope of the national standard. During the installation process, the specific spacing of the pipes needs to be determined accord
1. After designing the drawings for the installation of hot and cold water pipes and confirming that the conditions are met, the pipes can be installed. 2. First of all, find out t
Usually about 15 centimeters, but not less than 10 centimeters, and the hot and cold nozzles should be 2 centimeters higher than the wall. If the distance between the hot and cold
1. Professional testing Before using floor heating, check the pipeline and valve parts for leakage and outgassing. Also check whether the pointer of the pressure gauge is within th
The improvement in living standards has prompted contemporary families to pay more and more attention to the quality of drinking water. More and more people have realized that drin
Dec 14, 2022
1. If you go out for a long time, you can adjust the floor heating to a low tempture, which can not only maintain the indoor tempture, but also save energy. 2. Secondly, when using
Dec 13, 2022
1. When installing the hot and cold water pipes in the bathroom, the first thing we need to pay attention to is the distance between the pipes. They cannot be installed too close t
Ball Valve The ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. Among them, the hard-se
Dec 10, 2022
PPR Stop Valve is a random copolymer of propylene and ethylene, and the PPR pipe is formed by extruding PPR resin through an extruder. Advantage Due to the small friction between t
Dec 07, 2022
