1. When installing the hot and cold water pipes in the bathroom, the first thing we need to pay attention to is the distance between the pipes. They cannot be installed too close together, otherwise they will interfere with each other during use. At the same time, attention should be paid to the horizontal state of the cold water pipe. If the shower area is installed, the height of the pipe should be set at about 1.8 meters.
2. When installing the hot and cold water pipes on the wall, it is also necessary to pay attention not to place them in the same tank. At the same time, it is necessary to pay attention to the depth problem when grooving, and it must meet the requirements of the specification.
3. Before installing the cold water pipe, it is best to make a plan for the installation, for example, draw the drawing, and then install the drawing according to the installation drawing, which will be faster and avoid the phenomenon of wrong reinstallation. In addition, pay attention to the problems of each component, and each part must be tightened so that there will be no leakage during use.