1. Pay attention to the glue on the interface
The glue at the joint is particularly important. When remodeling and applying glue to the sewer pipe, first wipe the dirt on the joint with a towel to clean it, and attach the outer ring and the pipe. Don’t be lazy, or it will cause Sewer leaks.
2. Pay attention to the slope control
When installing the sewer, the slope must be well grasped. Under normal circumstances, the position of the water inlet is still a little higher than the water outlet, and the slope will not have strict requirements, but the principle of high ground after the installation of the sewer pipe must be considered. , so as to ensure that it can be used normally in the later period and prevent indoor water accumulation.
3. Relatively speaking, professionals know that if the water in the sewer pipe is short, the drainage effect will be better. If the pipe is too long, it is easy to block the phenomenon. Therefore, in order to prevent the details of this installation, It is best to find a professional to do the installation work, in order to effectively increase the use time.