1. Before installing the shower, it is still necessary to remove some impurities in the pipe to prevent damage or block the valve core, and no building materials should be left on the surface of the shower, and some dirt should be removed in time. It needs to be cleaned up. When adjusting it, you can't use too much force. You can only turn it according to the trend to prevent damage to the shower.
2. The shower hose should be in a natural stretching state every day. It should not be coiled with the faucet or in a dead angle to prevent the hose from being broken. You can't use this faucet as an armrest support in daily life. If the nozzle is not closed tightly during use, there may be a hard object stuck. It is recommended to remove the valve cover, remove some impurities, and then put it back on.
3. It is also necessary to develop a good habit in general. When the shower is used up, it is necessary to wipe it clean in time. It is also necessary to clean the shower nozzle regularly to prevent the phenomenon of blockage. If it is a metal nozzle, it is best to use a paper clip to clear it. A water hole will do.
4. The shower should be installed in a high temperature environment or in a place with too strong ultraviolet rays. In order to prevent it from accelerating the aging speed, it should be installed farther away from the heat source of the electrical appliance, especially the distance of 60cm from the Yuba is more suitable.