1. When installing the circulating pump, you need to clean the pipeline first, which can effectively prevent impurities, foreign matter, dirt, etc. in the pipeline from entering the pump body, thereby affecting the performance and life of the circulating pump.
2. After the circulating pump is installed, we need to energize it for trial use to check whether it can be used normally. During the trial, it is necessary to avoid the idling time of the pump body for more than 5 seconds, because if the idling time is too long, it is easy to shorten the service life of the ceramic bearing and affect the use effect.
3. For those who use the floor heating circulating pump for the first time, the pump body needs to be exhausted in time. Because if there is no exhaust treatment, there will be too much air in the pump body, so it is difficult to achieve the ideal supercharging effect, thus affecting the heating effect of floor heating.
4. When installing the floor heating circulating pump, you also need to pay attention to its installation location, and you cannot choose a safe place at will. It should be installed on the heating return pipe, so as to ensure that it has a good water circulation effect. In addition, when installing, it is recommended that you connect one more bypass pipe, so that in the future use, if there is a problem, it is also convenient to repair it.