1. Clean up when installing
Before installing the shower, it is necessary to remove the impurities in the valve core of the shower faucet. It is inevitable that impurities will enter the water supply pipe during decoration. Therefore, it should be removed in time to prevent blockage and even damage the valve core structure.
2. Installation height
When installing the shower, pay attention to the height. Generally, the hot and cold water pipes are about 1 meter away from the ground, but it can also be adjusted according to the height of the user.
3. Hole distance of hot and cold water
When installing the shower head, pay attention to the hole distance between the hot and cold water, which is usually 15 cm, and the error is best controlled within 1 cm. Moreover, it should be noted that the height of the hot and cold water should be the same, the pipes should be kept at right angles to the wall, and should not be inclined, so that the decoration will be higher after installation.
4. Protect the faucet and other hardware
When installing Huajiu hardware, it is not recommended to use a tool to twist it. Even if you use a tool, wrap the screw cap with plastic film to prevent the hardware from being damaged. In addition, after the shower is installed, pay attention to cleaning. It is inevitable that there will be impurities in the pipeline. Rinse it with water to prevent the water from being blocked when bathing.