1. Before installing the ppr pipe, the line needs to be slotted first, and then pre-embedded. However, this slot needs to be noted that it cannot be too deep or too shallow, otherwise it will affect the use of the pipeline.
2. For the water pipe made of ppr material, it can be hot-melted, but when hot-melting, it is necessary to pay attention to the temperature. The temperature is generally 260 degrees, which must be controlled well. If the temperature is too high, the pipe will be easily deformed, and if the temperature is too low, the effect of hot melting will not be achieved. At the same time, when installing, the pipe must be cut according to the size of the installation area.
3. For ppr water pipes, the pipes and fittings can be integrated, so in the construction process, as long as the construction is done properly, the later pressure test will be very strong.
4. In addition to construction, the ppr tube needs to be paid attention to in terms of storage. It should not be placed in the sun for a long time, otherwise the tube will be damaged. Because this kind of pipe is very afraid of sunlight, it needs to be covered with foam or insulation pad during installation, which can effectively prolong the service life of the ppr pipe and make it not easy to age.