PEX Pipes in Commercial Plumbing Projects

Welcome to contact IFAN, we are online 24 hours a day to answer your questions!

Material Properties of PEX for Commercial Use

Commercial projects demand oxygen-barrier PEX pipes.
The barrier layer prevents rust in metal components.
Manufacturers follow strict ASTM standards.

Blending and Extrusion

Workers mix polyethylene with silane and additives.
Machines extrude pipes through high-temperature dies.
Curing chambers complete the cross-linking process.

Post-Processing and Packaging

Pipes cool in water baths immediately.
Technicians wind them into 100-meter coils.
Plastic films protect coils from contamination.

Testing Under High Stress

Engineers test tensile strength and expansion limits.
Burst testing ensures the pipe handles 200 psi.
Inspections confirm layer uniformity along pipe length.

Repairing Sectional Damage

Plumbers identify leak location using infrared cameras.
They cut damaged pipe ends cleanly.
They replace the section using push-fit fittings.

Push-Fit Connection Instructions

Installers push the fitting into both pipe ends.
They twist slightly to ensure firm locking.
They pull back to verify retention.

Reactivating the Water Line

They open valves slowly after installation.
They listen for air bleeding from vents.
Water pressure stabilizes within two minutes.

Commercial Pipe Maintenance Guidelines

Facility managers inspect valves and connections monthly.
They check for unusual noises or stains.
Inspections prevent long-term water damage.

Safeguards for Pipe Longevity

Installers support long runs with brackets.
They route pipes away from boiler heat.
They use sleeves when crossing concrete walls.