Under normal circumstances, the gas pipe needs to be replaced once every 1-1.5 years. If it is not replaced after this period, problems such as aging, cracking, and falling off ...
Aug 10, 2022
It should not exceed 2 meters, and there should be no joints or tee in the middle. Otherwise, it will not only affect the gas consumption, but also easily deform and break at th...
The melting point of the PE pipe is determined by its density. The low tempture must be less than about 160 degrees, the medium tempture is about 190 degrees, and the high tempt...
The high tempture resistance can reach 60 °C, and it can be used for long-term hot water delivery below 60 °C. At the same time, it has a low tempture resistance of -40 °C, and ...
Can be buried underground. Because the ppr pipe is made of random copolymerized polypropylene as the raw material, it has the characteristics of energy saving, environmental pro...
The power of the hot melt machine is genlly around 1000-2000 watts. For example, the common power of ppr hot melt machine is 800 watts, 1000 watts, 1200 watts, 1800 watts and so...
It refers to the outer diameter of the pipe, ranging in size from 20mm to 1600mm, and can be used according to construction requirements. The pipes of this material are mainly m...
This material can bend a little, but not too much. Because the bending scale is too large, if it exceeds 20 degrees, the tube body will be easily worn, and even directly rupture...
No, because they are two different types of pipes, which are very different in terms of raw materials and production processes. At the same time, the molecular structure, densit...
For pe pipes with a wall thickness of less than 4.5 mm, its thermal melting time needs to be controlled within 45 seconds, with a wall thickness of 4.5 mm to 7 mm, controlled wi...
Whether it is necessary to release water or not depends on the actual situation. If the air in the heating pipe causes the floor heating not to be hot, the water in the floor he...
Aug 08, 2022
It is a plastic pipe, which is formed by the combination of certain chemical substances, plastics and other materials, and then extruded. This type of pipe is mainly divided int...
