1. There is a manual exhaust valve on the water distributor. If the heating is not hot, it is recommended to discharge the gas in the pipeline to ensure the heating temperature of each pipeline.
2. There is a filter on the front end of the water separator. It is recommended to remove the filter screen at the lower end of the filter regularly every year, clean it and install it, so as to ensure the cleanliness of the water pipe. After the heating is over, rinse the pipe network with clean water.
3. When heating for the first time, the indoor temperature will not rise to the ideal temperature quickly. During this time, the concrete layer on the indoor land surface will gradually heat up to store heat energy. After 2-4 days, the ideal temperature will be reached. The heating water temperature is recommended not to exceed 65°C.
4. If you are not at home for a long time, you can use the main valve of the water separator to reduce the circulating water volume, and be careful not to close it all. If the room is not heated throughout the winter, the water in the pipe should be drained in time.