As is well known, PVC pipes are affected by temperature. Therefore, when the temperature changes, PVC pipes will show significant differences, especially in terms of size, length, etc.

The influence of temperature on the size of PVC pipes
The slight changes in the size of PVC pipes due to temperature can be most noticeable through their size (especially the length of the pipe). In addition, this phenomenon also occurs as the temperature increases and decreases from the baseline temperature.
The influence of temperature on the capacity of PVC pipes
Starting from a baseline of approximately 22 ℃, the pressure bearing capacity of PVC decreases with increasing temperature. To understand the reduced pressure capacity, you must use these numbers and follow the following steps:
For example, if your PVC pipeline has a baseline capacity of at least 400 PSI at 22 ℃, this means that the pressure that occurs at 43 ℃ will be calculated using the following formula: 400 x 0.50=200. As a result, your new pressure capacity will be 200 PSI.
It is equally important to note that a decrease in temperature will not have a negative impact on the baseline pressure capacity of the pipeline. On the contrary, for temperatures below 22 ℃, it is best to refer to the published baseline pressure capacity for assurance.
The influence of temperature on the stiffness of PVC pipes
In terms of pipeline stiffness, PVC pipes become harder and stronger as the temperature decreases, and become more flexible as the temperature increases.
To reduce the published stiffness of PVC pipes or the working temperature of pipes above 22 ℃, please perform the following actions:
For 32 ℃, multiply by 0.93. Perform the same steps for the following numbers: 32 ℃ 0.88, 43 ℃ 0.84, 48 ℃ 0.79, 54 ℃ 0.75, and 60 ℃ 0.70.