1. Determine the height of the shower head
When professionals determine the height of the shower head, they will determine the most suitable height according to the user's on-site test situation, which is convenient for future use.
2. Determine the distance of the hall and the degree of hot and cold water
Generally, the distance between the hot and cold water center holes of the shower head on the market is 0.15m, and there will be two S joints in it. The distance can be adjusted appropriately, and the error cannot exceed 0.10m.
3, faucet and other hardware protection
When tightening the faucet, carefully wrap the faucet nut with a thick cloth so that the wrench does not mess up the faucet.
4. Pay attention to cleaning after installation
It is inevitable that a little dust will be generated during the installation process. After the installation work is completed, it should be cleaned up, especially the newly repaired pipes have a lot of impurities. If the pipes are not cleaned, the drainage effect may be reduced. Make sure the site is clean and the river continues to flow.