Precautions for Radiator Deflation

If the radiator is not hot, it is likely to be caused by the accumulation of air in the pipes. When there is air accumulation in the pipe, the water circulation will not flow smoothly at this time, which will affect the heating effect, and the air release valve needs to be released. If the method is not clear, the gas is not discharged, but the water in the pipeline is discharged, which will lead to insufficient hot water storage and the heating effect cannot be improved. When the heating is vented, do not open the water inlet valve or the vent valve directly at one time, otherwise the water in the heating pipe will be released too much, which will affect the heat dissipation effect of the heating and so on. In the process of deflation, special attention should be paid. If the exhaust valve is accidentally unscrewed, it will cause the water in the pipeline to gush out. Therefore, when screwing the valve, do not use too much force, but slowly and repeatedly screw it. put. Exhaust as much air as possible from each circuit. If the air is not fully released, it will still cause the heating not to heat up. If the valve is accidentally twisted off, use wooden chopsticks to insert it into the exhaust hole immediately to avoid a large amount of water leakage, which will cause the floor and furniture to be soaked.