1. Water quality
Before using the shower, you need to look at the quality of the shower water in detail. If the water is hard and the water contains fine particles or dust, it is not recommended to use a shower. If you insist on using it, you need to clean the shower head regularly, otherwise the shower head will be easily blocked by these particles or dust, resulting in poor water spraying effect.
2. Installation distance
In order to ensure the water spray effect of the shower, it is recommended that you try to shorten the distance between the shower and the water heater, so that the distance of the water flow is shortened, so that the time that the hot water stays in the pipe is shortened, and the water can flow into the water as soon as possible. In order to prevent the water pressure from affecting the shower outlet, it is generally necessary to keep the water pressure between 0.5~0.6MPa.
3. Hot and cold pipes
Showers generally need to be equipped with hot and cold water supply, while the cold water pipe generally needs to be installed on the right side, and the hot water pipe generally needs to be installed on the left side, and the distance should be kept between the hot water pipe and the cold water pipe at a distance of more than 20mm, avoiding both sides. interfere with each other.
4. Cleaning and use
Before installation, the debris around the shower should be cleaned to prevent debris from remaining on the rubber ring and valve core, causing the faucet to be blocked after installation. When using, it must be used in accordance with the product instruction manual set by the manufacturer, and the parts and other positions must be firmly installed.