1. Pay attention to the installation of the floor heating main
Before installation, you need to look at the design drawings. According to the construction requirements of the drawings, errors can also be reduced during construction. During construction, horizontal and vertical installations are also required. If there is looseness, after the supervisor is installed, a pressure test is required.
2. Pay attention to the installation of the water separator
After the main pipe is installed, install the water separator. When installing, it must be kept in a horizontal state, so that the normal circulation of water will not be affected. When the water separator is installed, the surface stains should be wiped clean, and each heating area should be marked at the same time, so as to achieve the purpose and facilitate future maintenance.
3. Pay attention to the laying of the backfill layer
When the backfill layer is made, small stones will be filled in, which can better protect the pipeline and prevent the pipeline from being scratched. Then use cement mortar to smooth the backfill layer. After the ground is leveled, the height difference should also be controlled within 5 mm. This is also for fear of affecting the smoothness of the ground.