1. You can cut the socks into pieces, stretch them out as much as possible and fix them on the floor drain. In this way, the hair can be collected in the stockings. When cleaning,
Jul 20, 2022
The floor drain is installed when the floor tiles are laid, so that the sealing of the floor drain is better, and it can also effectively avoid water leakage around the floor drain
Aluminum-plastic pipe is a new type of pipe which is composed of longitudinally welded aluminum pipe, inner and outer layers of polyethylene plastic, and hot melt adhesive between
Jun 30, 2022
If the floor heating pipe is broken, first find the broken position, and then use a special pipe cutter to cut the broken place. Then smooth the interface, remove the burrs, and th
The pipes that can be used in the floor heating system mainly include PEX pipes, PERT pipes, PPR pipes, PB pipes, etc. Due to different raw materials and production processes, the
Mechanical properties of PE pipe: hygienic, PE pipe material is environmentally friendly hardware, non-erosive, non-scaling; corrosion-resistant, PE is an inert material, except fo
PVC ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for fluid regulation and control. Compared with other valves, it has the follow
PE water supply pipe is a commonly used water supply pipe. Due to its good flexibility and high pressure resistance, it has become a common pipe material for modern water supply an
PE pipe and PPR pipe are commonly used water supply pipes, and their functions are basically the same. Therefore, some people may need to connect these two kinds of pipes together
1. The size of the 90-degree elbow is genlly calculated according to the diameter of the known pipe, and the bending radius is often 1.5 times the diameter. Depending on the model,
a. The sealing principle is different. 1. The opening and closing part of the gate valve is the gate, the movement direction of the gate is perpendicular to the direction of the fl
May 18, 2022
The Stop valve is a forced sealing valve, so when the valve is closed, pressure must be applied to the valve disc to force the sealing surface not to leak. When the medium enters t
