Main Points of Toilet Sewer Installation

1. Corresponding inspections should be carried out before installation. First, check the corresponding water inlet valve, and then check whether the required water pipes and connecting accessories are damaged, sand holes and cracks. If any problems are found, the water pipes should be replaced in time. part. 2. When designing the water pipe, the installation position of the washing machine faucet and the layout of the water should be considered. Also pay attention to the proper location of the power outlet. Connect the accessories of the toilet sewer, and install them in the corresponding wall, under the ground, etc. 3. The height of the water supply port on the wall should be appropriate, which is convenient for maintenance, and the hose should be exposed as little as possible, and no additional hose should be connected, giving people a simple and beautiful vision. 4. The water inlet and outlet of the toilet should be placed as far as possible where the sight can be blocked by the toilet. The position of the water outlet of the one-piece toilet should be determined according to the model, and generally it should be left 200mm to the left of the center of the toilet drain.