1. Leakage at the steering ball of the shower head
Unscrew the shower head from the steering ball ring, replace the O-ring or sealing strip inside, and then screw the shower head back to its original position.
2. Leakage occurs at the joint of the shower head handle
Re-purchase a new shower hose and faucet to spec, replace and install.
3. Caused by the precipitation of sand particles in the shower head
Unscrew the shower head and clean it thoroughly. You can also soak the parts in vinegar, taking care to avoid scratching them during the cleaning process. The shower head is an adjustable spray type, and all moving parts should be inspected for signs of excessive wear. If it cannot be moved, the entire shower head needs to be replaced.
4. The fine water of the shower head becomes a mixture of thickness and fineness
Rotate and adjust the shower head, open the small round cap between the shower heads with a screwdriver, rinse with clean water, and then install and restore it.