1. If there is water leakage in the sewer pipe joints in the bathroom, notify the upstairs neighbors to stop using water as soon as possible. Then carry out targeted repairs according to the pipe material.
2. If you use iron pipes, if there is a slight leak, you can use cement to fill up the leak at the joint. If the water leakage is serious, it is usually caused by long-term dripping and rusting. It is recommended to replace the water pipe with a new one.
If the material of the sewer pipe is made of plastic, it is recommended to use pvc glue or glass glue to apply it to the leaking area of the sewer pipe. Before applying the glue, wipe off the water on the pipe.
3. If there is water leakage in the sewage pipe of the bathtub, it is very likely that the leakage is caused by glue opening at the joint. It is recommended to use waterproof glue and apply it on the junction of the drain and the bathtub. It is likely that the blockage was accidentally cleaned. The sewer pipe is penetrated, and the sewer pipe should be replaced in this case.
4. If there is water leakage caused by the aging of the ground waterproof layer, reconsider the waterproof situation.
