How to Install 304 Stainless Steel Corrugated Gas Pipe Like a Professional

Welcome to contact IFAN, we are online 24 hours a day to answer your questions!

📏 Start with Accurate Measurements
Measure from the gas source.
Measure to the appliance inlet.
Add a little extra length.
It is better to have slack.

✂️ Cut the Pipe Cleanly
Use a stainless steel pipe cutter.
Rotate the cutter around the pipe.
Make the cut straight and square.
Remove any sharp burrs afterward.

🔧 Choose the Right Fittings
Gas pipe needs threaded ends.
Use brass or stainless fittings.
Match the thread size exactly.
Never mix different thread types.

🧵 Apply Thread Sealant Properly
Use yellow gas-rated tape.
Wrap it around the threads.
Wrap in the direction of tightening.
Do not use white water tape.

🔩 Tighten with Two Wrenches
Hold the pipe with one wrench.
Tighten the fitting with another.
Do not twist the pipe itself.
This prevents damage to the corrugation.

🧪 Test Every Connection
Open the gas valve slowly.
Apply soapy water to joints.
Watch for bubbles forming.
Bubbles mean you have a leak.

⚠️ Common Mistakes to Avoid
Do not overtighten the fittings.
Do not bend the pipe too sharply.
Do not reuse old fittings.
Do not skip the leak test.

💡 Pro Tips for Better Results
Buy pipe with pre-attached ends.
Keep the pipe away from heat sources.
Use protective sleeves through walls.
Label the pipe for future service.

🛠️ IFAN Makes Installation Easy
📩 Send an inquiry to IFAN now. Our professional team is available 24/7 to solve your problems.