1. The same project must use 160pe water pipes and fittings of the same brand, same material, and the same SDR. It is recommended to use the same batch of products to ensure consistent performance and reliability of DN160 PE water pipes and fittings. Hot melt connection.
2. Strictly control the quality of DN160 PE water pipes and fittings, use products that meet national standards, and products that have not passed the inspection shall not be used in engineering construction, so as to avoid potential safety hazards in the later use process, which is not conducive to normal use.
3. When the buried depth of the DN160 PE water pipe is lower than the bottom surface of the structural foundation, the pipeline should not be set within the pressure range of the foundation diffusion angle under the structural foundation to ensure that it is not easily damaged in the normal range of use and increases the service life.
4. The DN160 PE water pipe must ensure the required temperature during construction, and must be installed in an environment with a small temperature difference. In addition, during the construction, it needs to be carried out by professional construction personnel, which can avoid potential safety hazards, and the materials used must be produced by big brand manufacturers, and the quality is more guaranteed.