Visual inspection of the ferrule position
PP Compression Fittings require a simple visual check. The ferrule must be fully seated against the fitting body. There should be no visible gap between ferrule and body. Example: the ferrule touches the end of the fitting.
Check for even compression
The ferrule should appear uniformly compressed around the pipe. There should be no bulges or uneven spots. PP Compression Fittings show even compression when properly installed.
Verify pipe insertion depth
The pipe must be inserted to the full depth mark. A visible insertion mark on the pipe confirms this. PP Compression Fittings require the pipe to touch the internal stop.
No visible damage to pipe or ferrule
Inspect the pipe for scratches or cuts. Check the ferrule for cracks or deformation. PP Compression Fittings should have no visible damage.
Example: proper ferrule seating
A plumber installs a PP compression fitting. The ferrule is fully seated against the body. The connection looks uniform. PP Compression Fittings pass the visual check.
Example: incomplete ferrule seating
A plumber sees a gap between the ferrule and body. The ferrule is not fully seated. The connection is improper. PP Compression Fittings require full seating.
Pressure testing
Pressure testing is the most reliable verification method. Pressurize the system to 1.5 times working pressure. Hold pressure for 15-30 minutes. PP Compression Fittings pass if no pressure drops.

Use of a go/no-go gauge
Some manufacturers provide a go/no-go gauge. The gauge checks the ferrule's position. PP Compression Fittings can be verified with a gauge.
Example: successful pressure test
A system is pressurized to 100 psi. The pressure holds for 30 minutes. No leaks are detected. PP Compression Fittings pass the test.
Example: failed pressure test
A system loses pressure during testing. A leak is found at a fitting. The fitting must be replaced. PP Compression Fittings require re-installation.
Manufacturer guidelines
Follow the manufacturer's installation instructions. Each brand may have specific verification methods. PP Compression Fittings should be installed per guidelines.
Final inspection summary
PP Compression Fittings connections are inspected visually and by pressure testing. The ferrule must be fully seated. The pipe must be inserted to full depth. No damage should be visible. Pressure testing confirms no leaks. PP Compression Fittings are reliable when properly inspected. Example: inspect every connection for peace of mind.