1. Filter cleaning
The floor heating filter should be cleaned once a year before use to avoid blockage of the pipeline. When cleaning, close the main valve of the inlet and return water of the connecting conduit, open the filter, and clean the filter. If the filter is damaged, it is recommended to replace it with a new filter.
2. Chemical cleaning
When using chemicals to clean the floor heating, put the chemicals into the pipes and soak them for a while, which can remove the scale and mud from the water pipes.
3. Projectile cleaning
The projectile cleaning method is used to clean the floor heating, and the cleaning projectile is used to rub against the pipe to remove the dirt in the pipe, but it takes time and energy, so it can be used selectively.
4. Jet cleaning
The cleaning agent is fully attached to the pipe wall to achieve the effect of removing dirt, or the pulse method is used to mix water and gas to vibrate the heating pipe, which will not only not corrode the pipe fittings, but also achieve the cleaning effect.