1. Before installing the floor drain, the floor drain core must be taken out first, which can prevent the installation of debris from falling into the floor drain core and damage it.
2. The main purpose of most floor drains is to facilitate drainage, so when installing floor drains, the location must be paid attention to, and it must be slightly lower than the ground, so as to facilitate the drainage of water.
3. When installing the floor drain, if the distance between the drain pipe and the ground is too close, then the drain pipe needs to be cut short, so that after the installation is completed, the panel of the floor drain will be lower than the ground, so that it can be smooth. Drain the water. In addition, in order to prevent the overall decoration effect from being affected by the floor drain, its installation position cannot be much lower than the ground. If the drainage pipe is far from the ground, it can be filled with cement mortar, which is difficult to effectively increase the drainage pipe. The overall decoration effect will not be affected.
4. When the floor drain is installed, in order to prevent debris from falling into the drain pipe, it is necessary to block the pipe with a cloth, and then take it out when the floor drain core is installed, which can prevent the phenomenon of blockage.