Introduction to Brass Ball Valves
The brass ball valve is a type of quarter-turn valve which uses a spherical disc (the ball) to control the flow of water.
| Product Name | Brass Ball Valve |
| Color | Brass or Sliver |
| Size | 1/4''-4'' |
| Brand | IFAN/Customized |
| OEM |
Support |
| Sample | Free |
| Experience | 30+Years |
| Contact Us | Phone:+86 19884503412 Email：sales18-ifan@ifangroup.com |
Welcome to contact IFAN, we are online 24 hours a day to answer your questions!
The installation requirements and precautions for copper ball valves are as follows:
Installation requirements
Preparation work:
Ensure that the piping system is clean and free of impurities to avoid damaging the seat and ball.
Check the type, specification and material of the copper ball valve to ensure that it meets the requirements of use.
Installation position:
The ball valve should be installed in a position that is easy to operate and maintain.
The direction and flow direction of the valve should meet the design requirements to avoid reverse flow.
Flange connection:
When connecting the valve with the pipeline, the flange connection should be used to ensure that the connection is firm and tight.
The bolts on the flange should be tightened symmetrically, gradually and evenly to prevent leakage due to uneven force.
Installation direction:
The ball valve should be installed on the horizontal or vertical pipe, ensuring that the valve stem is in the vertical or horizontal state.
The ball valve with the transmission mechanism should be installed upright, that is, installed on the horizontal pipe, and the drive device is above the pipe.
Pipeline support:
Before and after the installation of the copper ball valve, the pipeline should be able to bear the weight of the valve, and it should be equipped with appropriate support if necessary.
Matters needing attention
Clean:
Before installation, the remaining impurities in the clean pipe must be cleaned and removed to avoid damaging the seat and ball.
Clean the valve hole to ensure that there is no dirt and prevent small particles from damaging the sealing surface of the valve seat.
Check:
Before installation, check whether the valve is in good condition, for damage or defects.
Check the operating flexibility of the valve to ensure that it can be opened and closed properly.
Seal:
Make sure the seal between the valve and the pipe is good to prevent leakage.
Use the specified gaskets and install them according to the pipe design requirements.
Installation environment:
Avoid installing copper ball valves in harsh environments such as humidity, corrosion, high temperature or low temperature.
During the installation process, pay attention to avoid damaging the actuator and accessories of the valve.
Maintenance:
After the installation is completed, the valve is adjusted to ensure that it works normally.
Check the sealing performance and operation performance of the valve regularly, find problems in time and deal with them.
Following the above installation requirements and precautions can ensure the correct installation and stable operation of the copper ball valve and extend its service life.