Yellow Flexible Pex Tubing

7 Advantages of Repiping with PEX
PEX piping offers many benefits. The decision to choose PEX will depend on what you value most (and your plumber’s recommendation). Here are 7 advantages of PEX piping.

1.Highly durable (interior applications only; no outdoor pex piping)
2.Flexible to expand and contract with weather changes
3.Easier to install using fewer fittings
4.Corrosion resistant in high pH water areas
5.Lifespan of up to 75 years (versus 50 for copper)
6.Resistant to condensation
7.Quiet (no more clanging pipes!)

Plumbing Tips for Installing PEX Pipes
Ready to take on some repiping as a DIY plumbing project? PEX piping installation will require the following tools:

1.Measuring tape
2.PEX pipe
3.PEX connectors
4.Crimp rings and a ring crimper
5.Crimp ring removal tool
6.Pipe hangers
7.Go/no-go gauge

Now that you've gathered your tools and materials, you can get started. PEX tube is installed in continuous runs, so there are fewer seams and fittings than other piping methods including copper piping. Installing PEX pipe is pretty straight forward and plumbing tips all start with the same advice: Plan your project and you will save time and wasted material.

1.Decide the location of the pipe – If you pre-planned your project, you already have an idea of the feet of the PEX pipe you will need and its location. Check locations and measure one last time before continuing. Cut each length of pipe and then place hangers. A hanger should be placed every 32-inches for a run of horizontally placed PEX pipe. For vertical PEX piping installation, secure the pipe every four to six feet.
2.Measure your PEX pipe twice – Yes, it is a less expensive plumbing pipe but if you cut a 20 foot run of PEX pipe an inch or two short, you will have a problem. PEX pipe can expand and contract 1-inch for every 100-feet. Keep this in mind when measuring and add a little ‘slack’ in the line when installing PEX pipe.
3.Cut your PEX pipe once – Now that you've measured your pipe, you can cut it into proper lengths. One of the most important plumbing tips about PEX piping installation is cutting the pipe. Cuts need to be as exact as possible and burr free. If the cut is not even and smooth, the PEX fitting may not seat properly, causing leakage.
4.Slide the crimp ring on – Place the crimp ring approximately two inches away from the end of the PEX pipe. This will give you enough space to place the fitting onto the end of the PEX pipe.
5.Perform PEX pipe fitting – Place the PEX fitting with the shoulder touching the tube. Once in place, slide the crimp ring over the barbs of the PEX fitting and align the barbs.
6.Crimp the PEX fitting - Open the jaws of the PEX crimping tool and align them so that they cover the crimp ring. Close the jaws of the PEX crimp tool firmly while holding the pipe steady. The fitting should now be sealed and can be checked with the go/no-go gauge, which should fit partially onto the crimp ring. If it slips all the way down the pipe, you need to redo your connection.
7.Place the pipe – Now that you have your connectors installed to the PEX pipe you can run the pipe, place it into its hangers, and connect it to the water system. Turn on the water, and check for leaks.

If you are considering using Yellow Flexible Pex Tubing in your residential or commercial property, call the IFAN today at +8613325756195. We are available 24 hours a day, 7 days a week.

Why choose us?

• As a manufacturer and supplier, we offer PEX Pipe products at preferential prices.
• Since the establishment of our company, we have been constantly innovating brands and developing new Yellow Flexible Pex Tubing and achieved good economic and social benefits.
• We aim to be the go-to source for PEX Pipe products, thanks to our unbeatable prices and outstanding service.
• We grasp the market trends, conscientiously implement the customer return visit system, timely feedback market information.
• As a leading supplier of PEX Pipe products, we offer competitive prices and dependable service.
• In line with the operating philosophy of "pouring high-quality goods, creating brilliance", the company has contracted many high-quality projects in many areas, and has won many honors. It is a high-quality Yellow Flexible Pex Tubing production enterprise.
• Our company provides PEX Pipe products with outstanding quality and competitive prices.
• The company has accumulated many years of industry experience and is forward-looking for the future development trend of the industry to drive the company's sustainable development.
• Our PEX Pipe products are engineered for excellent performance and reliability.
• We set the interests of customers as the front line, we know that our success depends on your success and development, and throughout the company from design to after-sales service every link.

Hot Tags: yellow flexible pex tubing, China yellow flexible pex tubing manufacturers, suppliers, factory, PERT EVOH Pipe, PERT PEX Pipe